glass ionomer adhesive material

[Application]
Bonding casting, ceramic restorations, appliances with ring; cavity lining,
 Bottom, filling, especially for wedge-shaped defect.
This material is easy to Apex Locator absorb water, can be eroded and dissolved. Further, after the reaction of a polycarboxylic acid aluminum,
Cement before they become hard, this process takes at least 30min.
Tooth surface should be clean and free of saliva, prosthesis surface should be free of impurities and pollution.
Curing process should pay attention to dehydration and water pollution are prohibited. Prosthesis
Edge or the edge of backfill applications varnish or light-curing sealant protection
Glass ionomer and zinc polycarboxylate like and enamel, dentin,
And alloy bonding occurs. In vitro and in vivo tests show that
 Bond strength by the dental instruments surface properties.

[Disadvantages]
Benefits - Easy mixing, high strength and rigidity, the release of fluoride. Acid-soluble,
Chemical bonding properties, transparency.
Disadvantages - slow solidification, solidification of early water-sensitive, adhesive properties is not exact,
Cut X-ray transmission, curing light  the initial pulp stimulation.

the dental handpiece cleaning and disinfecting machines

Through computer-controlled high-pressure multi-directional dynamic spray water temperature, pressure, and flushing time, frequency, etc., in the appropriate detergent / disinfectants under the action of dental handpieces and instruments, surgical instruments, dental supply companies laboratory utensils, etc. For cleaning the surface of the article stains and rinse cavity and reach the appropriate disinfection effects, widely used in hospitals at all levels of oral therapy clinic, supply room, operating room, various types of biological and toxicological laboratories.
• advanced cleaning technology to ensure the quality of cleaning
Triple filtration system to ensure water quality!
After each cleaning stage replacement water to ensure the health and clean!
Full three-dimensional dynamic variable direction continuous spray washing, cleaning items acting on the outer surface of the inner cavity and ensure thorough cleaning!
Unique dual pump structure, double stainless steel strainer, make stains separation automatically excluded!
• Reasonable capacity design, fully meet your cleaning needs
Hema Q1 cleansing and disinfection of the internal volume ≥ 150L, ​​up to 40 one-time cleaning dental handpieces and instruments
• compact, perfect accessories dental camera to solve your worries
High-quality stainless steel cleaning chamber
Using a molding cavity rounded design, high temperature resistance, corrosion resistance, easy to clean
Optional water softener, install easy to use, easy to maintain
Liquid cleaning agent can be equipped with automatic distribution system, accurate dispensing the cleaning agent, to ensure the controllability of the cleaning process
With high-quality water and drain hoses
• Upgrade the storage system, you want further ahead!
Can automatically store up to 500 times real clean record, to achieve a comprehensive monitoring and recording the cleaning process
Optional external thermal printer, cleaning records can be printed or manual print time
• Security settings
Electronic security locks, open the door, cleaning procedures automatically terminate
Failure alarm program
Voice prompt after the program ends
• Interface
Mounted on the back of the instrument interface for program upgrades
Used for cleaning the printer interface program prints
Cleaning procedures for filing and transfer of the USB interface
Maintenance Interface


An important role:
1, reduce staff due to manual cleaning process may cause infections, reduce labor intensity.
2, to eliminate manual cleaning dental material and disinfection of the quality of work in the process of management problems, to ensure the quality of cleaning will likely contaminated as a result of medical malpractice and occupational diseases to a minimum.
3, through more than 40 of the variable nozzle jet flow direction of high pressure and temperature, a full range of continuous flushing, the effect is much better than manual or ultrasonic cleaning.
4, the solution can not be cleaned by hand or ultrasonic handpiece cavity problem, after cleaning the cavity phone no residue, to facilitate subsequent autoclaving treatment, consistent with the "medical dental medical instruments disinfection practices" and implement " one man, one engine "to create the necessary conditions.
5, significantly reducing expensive equipment such as dental handpieces, manual cleaning process caused due to the high failure rate, lower actual expenditures.
6, is conducive to implementing the "hospital infection management practices", blocking the path of cross-infection to protect health care workers and the patients' physical and mental health.


Cleaning equipment / utensils type:
1, with dental equipment washing basket: while cleaning 1-40 branched dental handpieces and instruments;
2, with a surgical instrument laboratory washing basket: Common laboratory equipment or conventional surgical instruments;
3, with equipment cleaning baskets: 2

dental instruments sterilization problems

    Dental instruments effective disinfection and sterilization for the prevention and control of nosocomial infections is a very important part in controlling HBV, HCV, HIV blood-borne diseases is particularly important and urgent. At present, China's current situation is not satisfactory disinfection of dental instruments, dental dental chair instruments sterilization, there are some noteworthy issues: (1) understanding the inconsistencies, preventive medicine specialists and clinical staff recognize there are differences. Because there are still re-treatment of light on defense issues, clinical staff rarely treatment of oral diseases and prevent other communicable diseases linked to rational and effective disinfection is also easy to be overlooked. (2) clinical staff, lack of sterilization of technical knowledge to grasp, not rational selection and use of existing disinfection technology. With traditional dental instruments sterilized in situ in situ use of the phenomenon. Such as dental handpiece with povidone-iodine, iodine, alcohol wipe dental machine or natural evaporation of formalin fumigation, so that part of the equipment can not reach through the mucous membrane thoroughly sterilized. After disinfection resulting viable bacteria may be detectable on the instrument, occult blood and HBsAg positive. (3) hospital leaders lack of knowledge on the disinfection of dental instruments, dental instruments sterilization equipment configuration is not yet universal. (4) the lack of sterilization of dental instruments and regulations on the supervision mechanism. A wide range of Articulator commonly used dental equipment must be selected according to the situation of different disinfection methods and time. If you select the method of disinfection equipment improper or inadequate sterilization time can lead to cross-infection.

alumina porcelain teeth alright

Porcelain teeth in the market, there are many types of porcelain teeth. Currently, there are a lot of people because of the doctor's recommended choice alumina ceramic teeth. However, dental machine alumina ceramic

Teeth okay? Alumina ceramic dental Why is it worth so many doctors recommend it?


         Dental Clinic physicians that reason finds alumina ceramic teeth, because of the high cost of alumina porcelain teeth, more suitable for the majority of consumer groups. That

Alumina ceramic teeth okay? In fact, this problem is very simple, here is some information about the description of alumina porcelain teeth.


         Alumina ceramic porcelain teeth tooth is huge army which one. And to answer "alumina ceramic dental okay" this issue should also be from alumina ceramic

Dental material to begin with.ultrasonic scaler  Alumina is a mineral found in nature. Medical cleaned alumina processing, can be used as an excellent, high-tech biological material

Material. Alumina ceramic teeth good biocompatibility, superior to all kinds of metal alloys, while the gums no stimulation, no allergic reactions, it is suitable for use in the oral cavity. Alumina Full

This issue has porcelain teeth okay indisputable. Furthermore alumina ceramic tooth has a very high quality, that its not only because of its high quality material, the equipment is expensive, but also because of its

The use of the most advanced dental machine computer-aided design, laser scanning, and then controlled by a computer program made grinding, filling perfectly.

all-ceramic dental how much money Is there a standard

 Porcelain teeth in its more humane design has also been an increasing number of patients, but the skill and experience of the operating physician requirements are high. Dental Hospital has major

Years of all kinds of all-ceramic restoration systems produced by extensive clinical experience, professional physician will measure your custom color match your beautiful face and personality teeth, let your health

Kang Xiaorong more brilliant. So, how much does porcelain teeth?


        Lift cosmetic dental,dental chair  I must mention all porcelain teeth, porcelain teeth is an advanced method of repairing teeth. Porcelain teeth price is probably how much? Is a lot of planning to do

Porcelain teeth seeking beauty concern.


        How much money porcelain teeth Is there a standard? How much do porcelain teeth? In fact, all-ceramic dental price is not fixed, and the use of this material has a great specific relationship

, But this is not very expensive, because this is a very common cosmetic dental way to go. Experts, all-ceramic dental prices due to geographical and material different price

Cells will be different accordingly.


        Porcelain teeth price is probably how much? Expert analysis, for example, cast porcelain crowns, zirconia all-ceramic dental, German all-ceramic dental laser computer belongs porcelain teeth, but

Of different materials, porcelain teeth price is different.


        In fact, the all-ceramic dental price or secondly, good quality is the United States who should be most concerned about. Porcelain tooth has many advantages, its production process and the difference is not KaoCiYa

Many, are one of the most dental supply companies popular cosmetic dental methods: all-ceramic dental crowns because there is no presence of the metal substrate, effectively avoiding the metal allergies and gum black lines and other problems

To human health without any side effects; porcelain teeth, good transparency, gloss better. Morphological color is more natural and realistic; porcelain teeth with metal compressive strength comparable to

Without worrying phenomenon cracked porcelain; molars less greater retain their dental tissue.


        The price is all-ceramic dental and multifaceted have a relationship, so its price is not unified, concrete and materials used have a great relationship. Now use

General German porcelain powder, the use of such material made out of porcelain teeth will not only shape beautiful, but the color of teeth will be more close to the real teeth, teeth are strong, wear-resistant,

No chipping porcelain, of orthodontics wire course, if you use poor quality porcelain and metal so it will be a great impact, not only not beautiful, but not a long time will be used.

all-ceramic dental advantages are what it

Teeth as compiled shell" is the desire of many beautiful people beauty. Past metal porcelain teeth in the oral medical esthetic techniques boarded a another peak. And now begins

All-ceramic dental era, appeared it ultrasonic scaler won the "best U.S. dental" praise. In the end all-ceramic dental advantages, what does?


        First of all, all-ceramic dental comparable to natural teeth color can be used with: porcelain teeth each tooth through CAD / CAM tailored, no metal smell, its hierarchy, color and most

Close to real teeth. This is also one of the most emphasis on the consumer all-ceramic dental benefits.


        Secondly, all-ceramic dental tools  personalized esthetic effect is excellent: on all-ceramic dental aesthetic effect is concerned, it is almost perfect. The technology has a dozen colors to choose from,

And color stability, providing natural beauty, rich in active repair effect, and can be based on each patient's own esthetic conditions and needs to choose, to personalize America

Tooth best results. This is also the favorite of many a fashion trend of people all-ceramic dental benefits.


        Finally, safe and reliable all-ceramic dental pulp does not hurt: all-ceramic dental thermal conductivity is very low, only gold seventeenth, more conducive to the protection of the pulp, the quality of light

, Only a quarter of the gold, the dental chair patient more comfortable to wear. Porcelain teeth have been the world's more than 1.5 million dental patients lifted dental troubles, vivid colors make it

Over the last few years, people of European beauty choice.

all-ceramic dental shortcomings

So far, the most all-ceramic dental aesthetic effect is a dental prosthesis, hard, wear-resistant, high compressive strength, appearance naturally pure, crystal clear, color force

True, close to the natural teeth. All-ceramic dental biggest feature is no metal! So, all-ceramic dental shortcomings, what does?


     All-ceramic dental drawback is ultrasonic scaler relatively small, mainly in the following two ways:


     Shortcomings of an all-ceramic dental: all-ceramic dental expensive. This is the all-ceramic tooth on the market a big problem, many patients can not afford the fees. If you do all-ceramic dental restoration

Surgery, the first thing to consider is whether to allow their economic conditions, of course, in the choice of porcelain teeth, they also can not blindly pursue the most expensive porcelain teeth, because the material

Different, preferably under the dental tools guidance of professional doctors choose their own material.


     2 all-ceramic dental drawback: all-ceramic dental may cause allergic symptoms. Resin-reinforced cement due to the need to enhance strength, and found clinical applications in dentistry, and the

Compared with the complex plasma, using reinforced cement can cause allergies occur after the repair, but this dental chair incidence is very low. Consumers can check the body

See that he is not allergic, so as to effectively prevent the allergy.

dental machine history

Tablet press tablet press appeared in Europe earlier, there are nearly a hundred years of history. In China

in 1949, Shanghai Tianxiang Hua Kee Iron Works imitation caused British 33

Punch tablet press; 1951, dental x ray according to the U.S. 16-punch tablet machine converted into a domestic 18-punch

tablet machine, which is the earliest domestic manufacturing pharmaceutical machinery; 1957, designed and

manufactured

ZP25-4 type tableting machine; 1960, to design and manufacture successful 60-30 type tableting machine, with

automatic rotation, compression function, pressed varieties tablets, sugar tablets,

Calcium, coffee tablets. The same year also design and manufacture a type ZP33, ZP19 type tabletting machine.

In the 1970s began Shanghai Daiichi Pharmaceutical Machinery Factory (Shanghai Tianxiang's predecessor) and

Shandong Medical Instrument as compression tableting machine tablet press sentinel manufacturers large

Production ZP series tablet press. "Plan" period, the Department of Aerospace 206 HZP26 successfully

developed high-speed tablet presses. In 1980, the Shanghai Pharmaceutical Machinery Factory first system

designed to

Made the ZP-21W type tableting machine, to the early 1980s the international advanced level, is the first

domestic product. 1987, the introduction of the Federal German Fette company microcomputer control

Manufacturing technology, design and manufacture of P3100-37 rotary tablet press with automatic control

tablet weight, pressure, automatic digital film, films and other features automatic elimination of waste,

closed

Structured, the degree of purification to GMP requirements. 1997, the annual Shanghai Pharmaceutical

Machinery Co., Ltd. Tianxiang Kin developed ZP100 series rotary tablet press, GZPK100 Department

Column speed rotary tablet press.

In the 21st century, with the deepening of GMP certification, in full compliance with the GMP ZP series

rotary tablet machine have appeared: Shanghai's ZP35A, Shandong Liaocheng ZP35D

And so on. High-speed rotary tablet machine production, the pressure signal acquisition and rejection and

other technology has been developed rapidly, the highest yield is generally greater than 300,000 / hour, the

most

Large pre-pressure 20kN, 100kN maximum principal stress 80kN or more. For example, the Beijing Science and

Technology Co., Ltd. Sinopharm Long Li GZPLS-620 Series High Speed ​​Rotary Tablet Press,

Shanghai Tianxiang Jian Pharmaceutical Machinery Co. GZPK3000 series high speed rotary tablet press, Beijing

Aeronautical Manufacturing Technology Research Institute, PG50 Series High Speed ​​Rotary

Sheet machine.

With the level of manufacturing process dental supply companies technology, automatic control technology to improve and tableting

machine manufacturers use a variety of special needs, a variety of special-purpose tablet press

Have also emerged. For example, laboratory ZP5 rotary tablet machine for dry powder tabletting rotary tablet

press machine for gunpowder explosion-proof ZPYG51 series tablet

Rotary tablet machine.

dental machine development status of domestic

(1) tablet machine specifications numerous large quantities. Tableting machine, although the oldest of

pharmaceutical production equipment, as well as export the earliest, the largest pharmaceutical production

equipment

. Can suppress round tablets, dental x ray engraved tablets, shaped tablets, double-layer tablets, multilayer tablets,

ring-shaped piece, including chips and other sheet-type. Tableting machine manufacturer's number, types and

specifications, production

In the world, is an indisputable fact.

(2) easy to operate. In recent years tableting machine manufacturing companies starting to focus on quality

of products, mostly Bong letter "quality win" business philosophy. For the domestic pharmaceutical

manufacturers

Many tablets resin teeth variety, small-scale production features. Tableting machine manufacturing enterprises, the

development of tableting machine with a simple, clean convenient features, special

Do not be replaced varieties, cleared quickly and easily.

(3) low-tech, technological innovation after the weak. More than 40 domestic pharmaceutical production

equipment more than sixty varieties and specifications tableting machine tableting machine. Although,

Every year new products are constantly introduced. But where the real level of technology and high added

value of the species are few. Product duplication of development serious plagiarism

Prevalence of a variety of tablet presses up to dozens of manufacturers. To survive, many small-scale

pharmaceutical equipment enterprises not only in technological innovation to take "Imitation

"Strategy, some manufacturers even entirely by copying someone else's technology as their technology"

innovation ", and some even in the" shoddy. "In order to compete for orders, to

To take measures to keep the prices down, because brand loyalty is low, the price war playing, these brands

more disadvantage, will inevitably lead to the design and manufacture of tablet presses down the overall

level of

Retreat.

Vast majority of China's enterprises are private enterprises in technology, equipment, personnel and other

aspects not have the advantage, seriously restricting the technological innovation of enterprises. Section

Lack of corporate R & D institutions, innovation system is not perfect, the lack of technical innovation and

technical personnel, their overall dental supply companies technical strength is not strong, updated technology and equipment

research and production speed

Degree is very slow. The most noteworthy is that the entire industry technology professionals are in a "lean"

stage. It can be said, is the entire industry talent crisis

Inside spread.

How long can mend teeth

We know that the teeth rotten hole on the back as soon as possible to the hospital for treatment (fillings). Dental health supplement can be used exactly how long, this is the most concerned about the patient, but also a more complicated issue. Teeth dental chair repaired after a short period, and how the function, with a variety of factors. The first is timing fillings, ie when the patient visits the extent of dental caries. Location and shape of cavities have a great relationship. Followed by the filling materials, different materials and the bond of cavities vary. Furthermore, that dental cavities before processing. If only carious cavities and the cavity is good, shallow, and not adjacent surfaces of teeth, etc., are only required to clean and remove tooth decay cave organize, prepare cavity, thorough disinfection, with permanent dental materials the cavities were filled. Such a good complement of teeth should be used for life. When the dental pulp or apical lesions reached, as long as thoroughly anti-inflammatory treatment, and finally achieve tight filling, but also can be lifelong. But if severely dental drill damaged teeth, tooth hole is too large, too deep, irregular shape, or proximal hole type, then filled with good teeth should be used with caution. Otherwise, biting hard objects prone to splitting or dental fillings fall off. Especially kills nerve or pulp necrosis teeth without a blood supply, the teeth become brittle, so anti-inflammatory teeth after filling, biting hard objects it more likely to cause tooth splitting, filling off, resulting filling failure; even teeth completely split split into the following gums, often leading to tooth extraction. Thus, the success of the dental patient and doctor relationship between the two are very closely related. First, the doctor fillings should be strictly and carefully press the formal procedures to operate, and the patient dental machine should also be early detection and early dental treatment, filling a good fight in the early carious teeth, to achieve the best results.

toothache types and treatment

As the saying goes: "toothache is not a disease, pain up to life," there are many manifestations toothache
1, hot and cold sweet and sour pain: sweet tooth pain cold case, removal of irritants, the pain disappeared. Dental pigmentation, common to dental caries. Gingival margin tooth surface, no pigmentation, deep wedge-shaped defect. Two kinds of dental problems are mild, restorative treatment can improve. But if it is due to gingival recession caused by dentin hypersensitivity, the treatment process is more complicated.
2, spontaneous pain: spontaneous gingival pain, can not be located, the pain got worse when sleeping; cold, heat dental unit price stimulation can induce pain, remove the pain stimulus continues for some time, pain to the ear temporal radiation, which means that there is inflammation of the pulp.
3, persistent pain: persistent pain in the gums, can be clearly positioned teeth floating sensation, knocking teeth or bite things obvious pain. Description invade apical inflammation. Treatment is too much trouble, emergency principle is "decompression and drainage" - to open a hole in the middle of the tooth, so inflammatory secretions out, reducing the pressure of the pulp cavity. X-rays taken after the election according to the condition of root canal treatment or plasticizing treatment.
4, biting hard objects pain: dental machine pain biting hard things have knock history of stones and other hard objects. Tooth may have cracks, severe tooth may crack. Depending on the depth of treatment decisions cracked: If tooth is loose, you want to unplug. Such as shallow, you can do sets crown retained.
5, "best-rooted teeth" pain: do-rooted teeth (wisdom tooth, third molar) at the persistent pain, touch gum pain got worse, with severe mouth ox, often made inflammation, anti-inflammatory after the removal of "best-rooted teeth." .
6, gum pain: persistent pain in the teeth, accompanied by swelling, loose, many accompanied by food impaction symptoms of periodontitis performance.
 
  These symptoms should be dental chair treated early, while painkillers to ease the pain.

anti-seize compounds

Non-metallic anti-card is a high performance anti-seize compounds paste / spray bolted assembly lubricant, excluding metals and sulfur, chlorine, fluorine compounds, high-temperature conditions to prevent sintering equipment parts, corrosion, rust and wear; dental machine is a kind of high temperature and humidity conditions for static pressure or low-speed rotating equipment components have a good protective effect of anti-wear, anti-seize lubricant, but also with the use of gaskets, gasket seal to make more reliable, demolition more convenient.
Power plant (package nuclear), petrochemical, steel and other high-temperature sintering equipment bolt fastener anti, anti-card assembly.  screw connection pin, valve, pump and other parts of the assembly lubrication.  the coating can enhance the sealing effect of the sealing gasket to prevent the gasket and the substrate sintering stick together, making removal more convenient.

why pulpitis unbearable toothache

Dental pulp bit dry central location, the outer layer from the enamel, dentin and cementum encircled the only hole in the very tip associated with periapical tissue; pulp nerve from the trigeminal nerve, medullary cavity nerve fiber stress threshold is low, its susceptibility to strong pressure, and pulp tissue itself inherently tissue pressure than other organs tissue pressure is high. When the pulp first arterial vasodilatation inflammation, congestion, resulting pulp increased internal pressure in the cavity, so that the apical hole by compression of the vein, causing venous dental machine congestion, so that the exudate accumulation, due to the very tip through a small hole contact with the outside, so that poor drainage, poor blood supply, resulting pulp nutritional disorders, can cause pulp necrosis. Necrotic tissue and releases more inflammatory product, to make more vascular leakage increased intramedullary pressure is further increased, coupled with the pulp is enclosed in a rigid cavity inelastic, that is surrounded by the pulp tissue solid tooth structure, medullary cavity space capacity is constant, with no room for a buffer, increased oppression of pulp nerve pressure, it will have severe pain, with the pulp cavity pressure increases, further aggravating the pain, and thus This pain is really unbearable, the majority of patients have painful toothache Jane up vital experience.

oral Union

Oral is the beginning part of the digestive tract, oral cavity in the evolutionary process of the formation of some highly differentiated organ, adapted to sucking, chewing, saliva secretion, taste and feel the language and other complex functions. Oral known as the mouth, the digestive process involved, helping pronunciation dental Composite and speech movements, with sensory function, and can be assisted breathing, have important physiological significance, is the daily life of people engaged in various kinds of social activities essential organs. Everyday life, as we speak, are inseparable from the mouth to eat.

   Main features are: chewing, sucking, swallowing, speech, feeling, expression, food intake, participation in breathing. Oral function is under the domination of the central nervous system, relying on the teeth, lips, cheek, tongue, palate and other organs, through the relevant muscle contraction and jaw movement is completed, the masticatory system is the result of division of labor between tissues and organs.

toothache reason

1) acute pulpitis. More common in patients with deep caries, bacteria from the cavity into the pulp cavity, causing tooth nerve congestion and inflammation. Toothache is often spontaneous, nocturnal pain increased, hot and cold stimulation pain more drama. Pain may radiate to the face, temporal and ears. In patients with purulent pulpitis, the patient is experiencing pain intensified thermal stimulation, and cold stimulation of pain but reduce or disappear.
(2) acute periapical inflammation. By the development of acute pulpitis or trauma caused by such factors. Bingya was persistent pain, a sense of floating, not chewed, the patient can rightly pointed out Bingya, such as percussion Bingya then cause pain, this time due to Bingya nerves necrosis, and therefore not excite pain.

(3) acute periodontitis. dental instruments The nature and acute toothache periapical similar. Bingya occurs not only chew surfaced pain and sense, and has formed periodontal pockets and tooth mobility. Gingival tissue swelling and bleeding can occur repeatedly.

(4) periodontal abscess. Further development of periodontal tissue inflammation can cause purulent inflammation. Abscess formation, severe pain, abscess formation after local fluctuations feeling. In periodontal abscess formation, the pain can be significantly reduced or alleviated.

(5) dental hypersensitivity. Often due to gingival recession, tooth neck exposed dentin and dental defects due. At this time, cold, hot, sweet, sour and other stimuli can be pain, but the pain can disappear after the cessation of stimulation.

(6) food impaction pain. Teeth and tooth gaps can be caused by food impaction toothache, called food impaction pain.

(7) dry socket. More in 2-4 days after tooth extraction occurs, can cause spontaneous persistent severe pain. Checks can be found within the wound clot formation extraction bad, the smell.

(8) Other. Such as gums, jaw tumors, and trigeminal neuralgia, etc., can also cause pain in the corresponding region of the ipsilateral teeth.

Toothache Treatment:

For the treatment of toothache according to different causes corresponding treatment.

(1) acute pulpitis dental Composite and acute periapical, seasonal lines open pulp drainage, localized in cavities built into camphophenic and clove oil tampon can relieve pain; may or toothache Hegu acupuncture points, to obtain temporary pain to the hospital for further treatment after.

(2) acute periodontitis and periodontal abscess. In abscess formation can not clean tartar, taking periodontal Ning, antibiotics, coated iodine glycerin; if abscess has formed, it should incision and drainage, and use of antimicrobial agents to control infection.

(3) tooth hypersensitivity. Horizontal brush brushing method should be disabled to avoid excessive force action. Method using vertical brush teeth. Optional anti-acid toothpaste, Grass toothpaste, desensitizing toothpaste or 10% glycerol soda teeth, have a certain effect. Can also go to the hospital for desensitization therapy.

(4) food impaction pain. Used dental floss to remove food debris impaction.

(5) For residual root and crown and can no longer be reserved Bingya removal as soon as possible, every two months, and then install dentures (false teeth) repair.

Commonly used in clinical planting system usually consists of three parts

1 implant: is implanted within the bone, the present epidemic is still preform different manufacturers produce implants in shape, length, diameter, surface treatment vary. But, in any case, must be biocompatible implant excellent material such as titanium, bio-ceramics production. So far, titanium is still dental implant material of choice. Titanium is a rare metal, periodic table of 22, an atomic weight of 47.9, a specific gravity of 4.5. Press purity can be divided into four, four hardest but the toughness is less than 1. 4 containing more than 99% of titanium, 100% pure titanium can not be used nor economical. Most of the commercially pure titanium dental implants is that four titanium. Now widely recognized: the titanium metal made of bone implants can produce good osseointegration, its shape may be cylindrical, conical, can be threaded, or not threaded; surface etching, sand blasting or titanium ions surface coating of the rough surface is best because the rough surface can increase the implant and the bone cell contact area.
2 abutments: Is the implant through the soft tissue portion, usually with screws to fasten it to the implant. It can be the use of prefabricated components, or use the personalized production parts. Production base materials used also need excellent biocompatibility, dental Suction Unit such as: titanium, precious metals, zirconium oxide, etc., and processed into an appropriate shape and high surface finish to protect the soft tissue health.
3 Superstructure: refers prosthesis usually has the crowns, bridges, brackets, attachments and other structures. With conventional denture, implant through a standard prefabricated components easier and more accurately through the base station will restorations with implants connected.
Implant - supported dental prosthesis
Including dentition defect used in various types of implant-supported crown, bridge repair, denture repair used in various types of implant-supported fixed and repaired. Implant prosthesis connection with the main use screw-retained and adhesion retention in two ways.
Dental implant adapt to the crowd
Individual missing teeth, missing teeth area planting bed properly.
Most tooth loss, intends to use fixed partial denture, to reduce the gap of missing teeth abutment ends of the burden of the middle need to implant abutments.
Denture teeth, missing teeth absorb severe alveolar ridge can not bear the load of the denture base.
Full mouth tooth loss, viable overlay or full mouth full mouth fixed implant restoration.
Long edentulous hazards
Tooth gap appears: a long missing teeth, close to the teeth will tilt the jaw teeth elongation, dentition integrity destruction, over time, the remaining teeth are gradually sparse open to lose a good close contact, could easily lead occlusal function disorder that.
Masticatory dysfunction: deletion of the remaining teeth, a series of changes, so that the original good occlusal relationship changed due to the remaining teeth between the effective functioning of the area is reduced, chewing function is reduced, missing a first molar full mouth chewing function will be reduced 30% or so.
Alveolar bone atrophy: If missing teeth too long, alveolar bone will be varying degrees of disuse atrophy, and with missing teeth prolonged increase, this will give late denture repair and maintain facial aesthetics coordination enormous difficulties. Recommended reading: Ten Advantages of dental implant inventory
Affect pronunciation and appearance: Tooth loss can cause wrinkles increase the appearance of aging, speech is unclear. Eventually becoming restoration, teeth tilt and elongation would prevent jaw normal functional movement, often appear in the joints, pain and limited mouth opening, etc. temporomandibular relationship disorder that's syndrome.
Dental implant treatment
Including: clinical examination and imaging studies, diagnosis and treatment planning, surgery, denture making and repair, and implant and prosthesis maintenance. According to implant and tooth extraction time, implant surgery can be divided into immediate implantation, delayed instantly (after tooth extraction three months) and delayed planting (after tooth extraction three months and longer). According prosthesis loading with implant time relationship, implants can be divided into immediate loading, early loading and delayed loading.
Implant surgery completed to implant wear this stage, the only implant in the Long short. Implants, you need to follow your doctor's required to maintain oral hygiene and regular (three months, every six months, or every year) review. If subjected to a number of factors prosthesis may appear off, porcelain breakage, fracture, and the abutment screw loosening, implant breakage and other mechanical complications; and peri-implant bone resorption and other biological complications. Seriously affect dental equipments the restoration, aesthetics, the need for surgery or even remove the implant.
Above is about dental implant related presentations, I hope the majority of the friends help. Aesthetic Dental experts also said dental implant prosthetics is a "high, fine, sharp" feature technology, only those with a high standard of technology and equipment conditions of professional bodies in order to carry out this operation, and this professional engaged must possess Stomatology various professional systems knowledge and proficiency strict skills, it is recommended if you need dental implants, please choose a professional regular hospital. If you have additional questions, please consult the online experts.

the dental handpiece cleaning and disinfecting machines

Through computer-controlled high-pressure multi-directional dynamic spray water temperature, pressure, and flushing time, frequency, etc., in the appropriate detergent / disinfectants under the action of dental handpieces and instruments, surgical instruments, laboratory utensils, etc. For cleaning the surface of the article stains and rinse cavity and reach the appropriate disinfection effects, widely used in hospitals at all levels of oral therapy clinic, supply room, operating room, various types of biological and toxicological laboratories.
• advanced cleaning technology to ensure the quality of cleaning
Triple filtration system to ensure water quality!
After each cleaning stage replacement water to ensure the health and clean!
Full three-dimensional dental Composite dynamic variable direction continuous spray washing, cleaning items acting on the outer surface of the inner cavity and ensure thorough cleaning!
Unique dual pump structure, double stainless steel strainer, make stains separation automatically excluded!
• Reasonable capacity design, fully meet your cleaning needs
Hema Q1 cleansing and disinfection of the internal volume ≥ 150L, ​​up to 40 one-time cleaning dental handpieces and instruments
• compact, perfect accessories to solve your worries
High-quality stainless steel cleaning chamber
Using a molding cavity rounded design, high temperature resistance, corrosion resistance, easy to clean
Optional water softener, install easy to use, easy to maintain
Liquid cleaning agent can be equipped with automatic distribution system, accurate dispensing the cleaning agent, to ensure the controllability of the cleaning process
With high-quality water and drain hoses
• Upgrade the storage system, you want further ahead!
Can automatically store up to 500 times real clean record, to achieve a comprehensive monitoring and recording the cleaning process
Optional external thermal printer, cleaning records can be printed or manual print time
• Security settings
Electronic security locks, open the door, cleaning procedures automatically terminate
Failure alarm program
Voice prompt after the program ends
• Interface
Mounted on the back of the instrument interface for program upgrades
Used for cleaning the printer interface program prints
Cleaning procedures for filing and transfer of the USB interface
Maintenance Interface
An important role:
1, reduce staff due to manual cleaning process may cause infections, reduce labor intensity.
2, to eliminate manual cleaning and disinfection of the quality of work in the process of management problems, to ensure the quality of cleaning will likely contaminated as a result of medical malpractice and occupational diseases to a minimum.
3, through more than 40 of the variable nozzle jet flow direction of high pressure and temperature, a full range of continuous flushing, the effect is much better than manual or ultrasonic cleaning.
4, the solution can not be cleaned by hand or ultrasonic handpiece cavity problem, after cleaning the cavity phone no residue, to facilitate subsequent autoclaving treatment, consistent with the "medical dental medical instruments disinfection practices" and implement " one man, one engine "to create the necessary conditions.
5, significantly reducing acrylic resin teeth expensive equipment such as dental handpieces, manual cleaning process caused due to the high failure rate, lower actual expenditures.
6, is conducive to implementing the "hospital infection management practices", blocking the path of cross-infection to protect health care workers and the patients' physical and mental health.
Cleaning equipment / utensils type:
1, with dental equipment washing basket: while cleaning 1-40 branched dental handpieces and instruments;
2, with a surgical instrument laboratory washing basket: Common laboratory equipment or conventional surgical instruments;
3, with equipment cleaning baskets: 2

anti-seize compounds - Product Features

● Keep in extreme heat, high humidity conditions lubricity.

● high temperature resistant, can withstand high temperature 1315 ° C non-hardening, non-flowing, without decomposition.

● Excellent corrosion resistance acrylic resin teeth to salt water and acid-base can be safely used for steam, salt and other vinyl monomers occasions.

● Specially extreme pressure protection components to ensure solid Tighten the preload stress is not discrete, and maintain the minimum tightening torque.

● Long life, long-acting form of the clutch intermetallic protective film, not washed away by water and steam, in order to resist high temperature oxidation corrosion conditions

anti-seize compounds

Non-metallic anti-card is a high performance anti-seize compounds paste / spray bolted assembly lubricant, excluding metals and sulfur, chlorine, fluorine compounds, high-temperature conditions to prevent sintering equipment parts, corrosion, rust and wear; dental Vacuum Former is a kind of high temperature and humidity conditions for static pressure or low-speed rotating equipment components have a good protective effect of anti-wear, anti-seize lubricant, but also with the use of gaskets, gasket seal to make more reliable, demolition more convenient.
Power plant (package nuclear), petrochemical, steel and other high-temperature sintering equipment bolt fastener anti, anti-card assembly.  screw connection pin, valve, pump and other parts of the assembly lubrication.  the coating can enhance the sealing effect of the sealing gasket to prevent the gasket and the substrate sintering stick together, making removal more convenient.

the United States rallied to destroy tooth tooth tooth America to be cautious

Today, cosmetic dentistry has been accepted by more and more people in all kinds of dentistry, dental clinics, and even some beauty salons, shopping malls, supermarkets, have emerged teeth whitening

Tooth services. I learned that the investigation, the current cosmetic dental "boom" scene in hides many problems. On the issues behind the author cosmetic dental specialist mining

Women's Hospital to visit the new century U.S. dental center cosmetic restoration expert Zhao Debiao director.
Zhao Debiao physician, dental aesthetics experts, Chinese Stomatological Association members, had long employed in the Beijing Military Region, 264 Hospital. Has many years of dental handpiece clinical experience, good teeth

Tooth cosmetic restoration, maxillofacial surgery types, oral endoscopic treatment, dental treatment.
"Doctor please help me!"
"I now regret dead, every heart was heavy, cried many times, have lost confidence in life. The doctor put my teeth done badly, causing me a

Life ah! I'm 20 years old, ah, how the future can do ah? Do I have to wear this over a lifetime teeth yet? "This is a patient called the New Century America Jamaica

Heart hotline 67353300 and consult a doctor first words she said on the phone, she was a civil servant, because there is a little bit before the incisors slightly before Alice, 3 months

Went up a dental clinic, doctors put her above all made the front teeth porcelain teeth. Done, not only before the sudden no improvement in the situation, the color of the outer teeth

Better than the original concept of ugly teeth and more!
After appointment, the patient came to the U.S. dental center in the new century, the patient sadly restoration experts Zhao Debiao director of the center, said: "I had a very healthy tooth itself

Kang also very white, but actually was white-gray color of dentures! People see is the obvious dentures! I now no longer as before, mouth and laughed! And now

There are two dental tools  in the beginning there was a slight pain in the gums a little redness, tearing event will be a little like a cold sore. "
As one focuses on the concept of Love Teeth dental care cosmetic restoration expert, Zhao Debiao director listened to complete the patient's complaint, it was very sorry to say that so many years of clinical

Bed work experience, there is often a cosmetic dental patients who failed to come to re-do cosmetic dental. Zhao Debiao Director reminded that people are prepared to do cosmetic dentistry: Dental Beauty

Fashion, but fashion is also not too much longer, excesses to do, otherwise there will be red, swollen gums, pus overflow, bleeding, obvious odor, discoloration, brittle teeth, pain, etc.

Problem. Cosmetic dental expert, Beijing Dental Hospital, vice president Professor Wang Songling that the choice of methods for teeth whitening improper teeth often cause irreversible

Damage.
Be careful to do cosmetic dental
As people's living standards improve, more and more people on cosmetic dental attention, do porcelain teeth, porcelain teeth, teeth cleaning, tooth ornaments and other items of a series of cosmetic dental treatment

Number of linear upward trend, but most people a serious lack of cosmetic dental related knowledge. It is understood that in Taiyuan, large and small dental hospitals, dental clinics Star

Spread all over Romania. Dental treatment in access to computer technology digital age of today, whether from dental equipment, expertise, timeliness or on sterilization treatment aspects

Made high demands. I found that in the streets, there are many irregular dental clinic, the most obvious manifestation of this is the patient to the clinic to see a doctor, clinic mention

For the treatment of patients is often not the most suitable, but since there is very considerable profits, should put the treatment of all therapeutic into the therapeutic range, so that patients

Who suffered a double health and economic losses.
Do it made of fine
It is understood that as extremely demanding, expensive dental cosmetic items, is not a simple dental or oral medicine technology, but to supplemented psychology, aesthetics

Knowledge, professional cosmetic dental experience, technology, and have doctors, technicians, patients with a high degree of cooperation, plenty of time, be possible to achieve satisfactory cosmetic effect

Fruit. New Century America Dental Center experts believe that cosmetic dental and dental cleaning, dental treatment and so different, should be made by the patient to the doctor cosmetic dental requirements, then the doctor-patient

Both sides need to do cosmetic dentistry, and can achieve satisfactory results for serious discussions and to fully communicate. And should not be in the patient's diagnosis and treatment of other dental disorders

When cosmetic dental recommendations made by doctors. Both doctors and patients must strictly to themselves.
Dental Expert Tip: how do porcelain teeth considered a good
New Century America Dental Center Director Zhao advice: want to have beautiful teeth, just the teeth white, neat change is not enough. Also need to be based on individual facial features, mouth

Lips, teeth shape, gender, age, occupation and other circumstances carefully designed and precision dimensional measurements.
Porcelain teeth must be done for the patient's dental condition combined oral camera digital positioning system, a comprehensive oral examination, to provide patients with the best design and

Porcelain dental materials, in order to accurately positioning, security, painless, and most importantly without sequelae. And also to provide "quality card" and "quality assurance card", so make roast

Porcelain teeth can achieve healthy and beautiful effect, but also completely removed the patient's worries.
"Finding 100 KaoCiYa loser" campaign
Cheap dental disorderly market competition, creating a large number of unqualified, unsightly rubbish-style porcelain teeth. One can imagine that a bid as long as twelve hundred or even

Tens of dollars of ordinary porcelain teeth, the production quality is difficult to secure. Beijing Dental Hospital, vice president Professor Wang Songling once said, a cheap (even medical materials into

This is not enough) porcelain teeth, what about the quality of the source of the material is questionable; much less labor to pay doctors and technicians, if you can ignore the doctor's work pay

Excluding that actually means doctor's skill level is not high, tradesmen production capacity can not.

porcelain teeth

Nickel-chromium alloy porcelain teeth
 Ingredients: Ni 61.5, Cr 22.0, 11.0 tungsten, aluminum, 2-3.0, 2-3.0 silicon. Material supplier: U.S. Argen advantages: 1, inexpensive, beautiful and practical. 2,

Hard wear-resistant, smooth surface, never change. 3, with veneered good match. Disadvantages: poor biocompatibility, easy to cause gum black and adverse consequences. Adaptation

Disease: single crown, Longbridge apply.
Bio cobalt chromium metal alloy porcelain teeth
Advantages: 1, superior corrosion resistance and high biocompatibility, gingival bleeding and gingival solve black and other symptoms. 2, does not contain allergens such as nickel-beryllium carcinogenic metals,

Address the nickel-metal ions cause irritation symptoms. dental equipment supplier 3, higher metal porcelain bond strength and force, to ensure restoration success. Indications: ceramic single crowns, multiple satellites

Porcelain dental bridges, crowns and more multi-metal single crown teeth bridges, dentures bracket.
Cast porcelain porcelain teeth
  Similar cast porcelain has a natural color, chemical stability without degradation of oral, non-irritating ion release, good biocompatibility, almost no thorns on the organization

Shock, restoration surface is smooth, with good self-cleaning effect is not easy adhesion plaque. Indications: single crowns, bridge (three units), veneers, inlays. Benefits:

1, excellent aesthetic properties and biocompatibility, such as: no black edge, good translucent appearance, no gingival inflammation phenomena, good marginal adaptation.

2, that has good physical properties it can withstand the force. 3, low temperature conductivity properties.
Titanium porcelain teeth
  Features: The technology is in space technology and the perfect combination of modern medicine product, through FDA (U.S. Food and Drug Administration) rigorous testing of the titanium-containing medicine together

Gold, after the United States three Dentistry Academy researchers demonstrated its excellent physical properties, with the use of ceramic materials, but also increase the performance of the color space, improve America

Feeling. Indications: Single porcelain crowns, dental bridges and more pieces of porcelain, metal single crown multiple teeth bridges.
Precious porcelain teeth
: A, beautiful, warm golden background tone is closer than non-precious dentin color, more sparkling, making a porcelain crown has good aesthetic effect. 2, good

Biocompatibility, very safe to use. 3, does not produce gingival margin black line. Adaptability: ceramic single crowns and multiple unit porcelain bridge, telescopic crowns and so on.
CAPTEK
Features: 1, special composite structure makes it stronger than gold deposition within the crown in gold content of 84.5, and the other containing platinum. 2, the special surface structure of the metal lock

And greatly enhanced the binding force of porcelain, porcelain breakage rate is greatly reduced. 3, dental Composite super gold platinum layer mesh structure inside its strength unmatched, to accomplish different wider

Indication. 4, a special process, without making wax and casting to greatly improve the precision of its adaptation than other casting processes prosthesis. 5, special

In effect, is the ideal material aesthetic restorations, a large number of clinically proven, long-term results than the general porcelain teeth.

self-protection dentists notified

Our nation's doctors, and proximity to the dilemma, the doctor becomes a high-risk occupation. Dentists must learn to protect themselves and prevent medical risks, resolve medical disputes, which

Where combined with my many years of clinical experience, introduce our dentists to "prevention" in clinical work on how to implement risk control, protect yourself.
A patient admissions, through understanding of the disease and patient verbal communication, bargaining efforts, determine whether it is a picky person, high expectations of people, it is difficult

Communicate with people, the illness is incurable, and if so, to identify the reasons for its introduction to a higher level of medical attention.

 Second, through admissions, dental equipment supplier to understand history, by looking clinic interrogation, early detection hysteria, psychosis, temporomandibular joint disorder syndrome patients, these patients do young doctors

Amount to avoid treatment.

 Third, the extraction of contraindications, should by heart, strictly controlled. Patients over 70 years old extractions, in-person measurement of blood pressure, you can not listen to individual reports. Extraction required family

Accompanied. Do not believe the patient uttered: extraction problems do not find you, then this type of saliva.
 Fourth, dental clinic, dental extraction is the maximum risk in the clinic, extractions as possible in the morning, after four in the afternoon, try to avoid extractions. You do not on night duty, to prevent half

Night called you up and deal with tooth extraction bleeding wound. Half an hour after tooth extraction was observed, such as the timely processing of continued bleeding, bleeding wounds, put iodoform, hemostatic sponge or

Direct suture. Contact to the patient, there were quick response.
Five, careful history taking, cerebral infarction after myocardial infarction in patients with high blood pressure patients, fillings also need to be careful.

Six, treatment, frequently changes the instrument to prevent separation equipment, root canal measurement, note the location and length of the root canal values ​​recharge gutta percha length as a basis to prevent

Ultra-charge, charge less.
Seven, heat sealing strips teeth drugs, can not be heated directly into the patient's mouth, the application of instrumentation, to prevent cross-infection and burns patients. </ DIV>

 Eight, endodontic treatment, and the patient after tooth extraction, your doctor rather more not less, plus a special, painful inflammation must eat anti-inflammatory drugs, "is not followed up" also must not forget

.
 Nine, </ STRONG> endodontic treatment, sealing deactivator patients leave your phone number, to prevent the closure inactivating agent to the time when the patient forget the referral, the doctor promptly phone alerts

Prevent chemical periapical.

 Ten, cobalt-chromium porcelain teeth silver black line, possible allergic reactions should be informed in advance so that patient selection. Fixed bridge design should be reasonable, not contrary to the principle of medicine. Prepared tooth structure

Exposed pulp, dental Composite to act decisively, pulling marrow treatment to avoid future trouble.

Eleven, orthodontic tooth extractions extra cautious when, preferring to be corrected, the first observation, after extraction, step by step, so that the patient signed on agree with your proposal. After pulling

Teeth you will not be passive. May avoid subsequent extractions.
XII begin orthodontic models, maxillofacial phase properly preserved. Correction program patients or parents to sign, correct conclusion, patients picky, they can come up with convincing evidence.

 Thirteen teeth before bleaching with shade carefully recorded patients teeth, the tooth surface, the third color, bleaching treatment, so that patients have more to prove drift

White effect.
Fourteen, outpatient records to detail, outpatient diagnostic caution, leaving room for maneuver.
 Fifteen, talking leeway, do not make rash promises, can not promise regular patient compliance with operating requirements.

Sixteen, not indiscriminately boasted, I can assure you what what. Medical writing to formal, not altered, proof of diagnosis and medical records verbatim.
 Seventeen, met medical disputes, we do not stir up trouble, but not timid, and patient communication solutions.
 Eighteen, not in front of the patient before the peer evaluation of the merits of restoration treatment, patients with other doctors clinics let you analyze the situation, "who is right and wrong, must be non-human,"

Remember, you have to be vigilant, what you say may be spread to other doctors ears patients, patients with medical disputes as weights.

 Nineteen, his all else fails, be sure to superiors doctor, do not self-righteous.

 Twenty, high-quality treatment technology, strict compliance with treatment practices and good service attitude, the doctor the best way to protect themselves.

self-protection dentists notified

Our nation's doctors, and proximity to the dilemma, the doctor becomes a high-risk occupation. Dentists must learn to protect themselves and prevent medical risks, resolve medical disputes, which
Where combined with my many years of clinical experience, introduce our dentists to "prevention" in clinical work on how to implement risk control, protect yourself.
A patient admissions, through understanding of the disease and patient verbal communication, bargaining efforts, determine whether it is a picky person, high expectations of people, it is difficult
Communicate with people, dental Composite the illness is incurable, and if so, to identify the reasons for its introduction to a higher level of medical attention.
 Second, through admissions, to understand history, by looking clinic interrogation, early detection hysteria, psychosis, temporomandibular joint disorder syndrome patients, these patients do young doctors
Amount to avoid treatment.
 Third, the extraction of contraindications, should by heart, strictly controlled. Patients over 70 years old extractions, in-person measurement of blood pressure, you can not listen to individual reports. Extraction required family Accompanied. Do not believe the patient uttered: extraction problems do not find you, then this type of saliva.
 Fourth, dental clinic, dental extraction is the maximum risk in the clinic, extractions as possible in the morning, after four in the afternoon, try to avoid extractions. You do not on night duty, to prevent half
Night called you up and deal with tooth extraction bleeding wound. Half an hour after tooth extraction was observed, such as the timely processing of continued bleeding, bleeding wounds, put iodoform, hemostatic sponge or
Direct suture. Contact to the patient, there were quick response.
Five, careful history taking, cerebral infarction after myocardial infarction in patients with high blood pressure patients, fillings also need to be careful.
Six, treatment, frequently changes the instrument to prevent separation equipment, root canal measurement, note the location and length of the root canal values ​​recharge gutta percha length as a basis to prevent
Ultra-charge, charge less.
Seven, heat sealing strips teeth drugs, can not be heated directly into the patient's mouth, the application of instrumentation, to prevent cross-infection and burns patients.
 Eight, endodontic treatment, and the patient after tooth extraction, your doctor rather more not less, plus a special, painful inflammation must eat anti-inflammatory drugs, "is not followed up" also must not forget.
 Nine, endodontic treatment, sealing deactivator patients leave your phone number, to prevent the closure inactivating agent to the time when the patient forget the referral, dental equipments the doctor promptly phone alerts
Prevent chemical periapical.
 Ten, cobalt-chromium porcelain teeth silver black line, possible allergic reactions should be informed in advance so that patient selection. Fixed bridge design should be reasonable, not contrary to the principle of medicine. Prepared tooth structure Exposed pulp, to act decisively, pulling marrow treatment to avoid future trouble.Eleven, orthodontic tooth extractions extra cautious when, preferring to be corrected, the first observation, after extraction, step by step, so that the patient signed on agree with your proposal. After pulling
Teeth you will not be passive. May avoid subsequent extractions.
XII begin orthodontic models, maxillofacial phase properly preserved. Correction program patients or parents to sign, correct conclusion, patients picky, they can come up with convincing evidence.Thirteen teeth before bleaching with shade carefully recorded patients teeth, the tooth surface, the third color, bleaching treatment, so that patients have more to prove drift
White effect.
Fourteen, outpatient records to detail, outpatient diagnostic caution, leaving room for maneuver.
 Fifteen, talking leeway, do not make rash promises, can not promise regular patient compliance with operating requirements.
Sixteen, not indiscriminately boasted, I can assure you what what. Medical writing to formal, not altered, proof of diagnosis and medical records verbatim.
 Seventeen, met medical disputes, we do not stir up trouble, but not timid, and patient communication solutions.
 Eighteen, not in front of the patient before the peer evaluation of the merits of restoration treatment, patients with other doctors clinics let you analyze the situation, "who is right and wrong, must be non-human,"
Remember, you have to be vigilant, what you say may be spread to other doctors ears patients, patients with medical disputes as weights.
 Nineteen, his all else fails, be sure to superiors doctor, do not self-righteous.
 Twenty, high-quality treatment technology, strict compliance with treatment practices and good service attitude, the doctor the best way to protect themselves.

the financial crisis on the impact of the medical device industry

The current global financial crisis facing the financial crisis is not over the past 100 years occurred in the most serious financial crisis, the financial market crisis led recession

First indicator, but in the past history, the medical industry is indeed showing good resilience. Meanwhile in the world, the medical industry M & A activity remains strong.

Because of China in the financial tsunami and the relative stability of the seismic capacity of the medical industry, plus Yixie sub-sector high profits, capital influx to him constantly.

At present, dental Endo Box China's medical device industry although there is a gap compared with developed countries, but the pace of development of China's medical device makes the world look askance. China's most

Research and development of new medical device products also walk in the international medical device industry tip. Within the next few years, China will surpass Japan to become the world's second largest medical device market

Field.

With the development of domestic enterprises, the rapid increase in strength, and market focus shifted from high-tech to the universal, the competitiveness of domestic products is gradually increased, the domestic

Companies expand market offers a rare opportunity. Foreseeable future, China's medical device industry is a huge space for development.

In addition, the worsening financial crisis in the world in the context of the international economic environment, to resist the negative impact on China, November 5, 2008 regular meeting of the State Council

Works meeting proposed to implement a proactive fiscal policy and moderately loose monetary policy, introduced 10 more forceful measures to expand domestic demand. November 23, 2008,

Notification issued by the Ministry of Health, in the country's new 100 billion yuan central investment arrangements, the arrangements for special investment 4.8 billion yuan to support rural health service system.

"2008 will invest an additional 4.8 billion" new rural Yixie invest 1.5 billion, with "2006" planning "," new rural Yixie invest 6.771 billion, the total increment of two parts

8271000000. dental drill This increment of 8.271 billion mainly for rural medical equipment procurement, time, mainly in 2008 -2010. Will face a huge low-end medical equipment needs

Seeking to become the first to benefit industry.

teeth invisible braces advantages

1, convenient: You can pick their own wear, does not affect the social, eating, exercise and so on. While reducing the number of referral, saving you valuable time.
2 Clean: oral hygiene easier to maintain, do not worry gingivitis, tooth demineralization, discoloration and other issues.
3, convenient: Short and effective course of treatment, the general treatment can be completed around September to December. Traditional methods of treatment time of about 8 hours, invisible orthodontics only 3 hours.
4, appearance: almost completely invisible. You will notice it in someone else to complete orthodontics, solves many patients straightening teeth appearance concerns.
5 Comfort: Since there is no traditional dental machine sense of the bracket, steel and other orthodontic appliance correction process is no longer suffering. On periodontal tissue irritation and discomfort minimum.

cclusal trauma

occlusal trauma (trauma from occlusion, occlusal traumatism) General: Since occlusal relationship is not normal, or occlusal forces uncoordinated, masticatory muscles caused by damage to the system is called occlusal trauma. Narrow: especially periodontal system damage. Teeth when biting Taiwan will withstand a certain power, which is known as jaw force. Under normal circumstances the jaw force on the periodontal tissues can produce positive stimulus, and abnormal jaw force will cause pathological periodontal tissue damage. Jaw abnormalities including the size and direction of the force of twenty thousand inquiries meanings. dental Suction Unit Jaw force size, orientation, frequency and time and other factors can affect the periodontal tissue changes, and periodontal support force change on the Scots have a certain ability to adapt its adaptation range mesh person to another.

what foods will help children grow teeth

 As the person's life is always in different stages of development, like the teeth are developed in accordance with certain rules, it is rugged and is closely related to the development of the whole body

The. So, from early childhood, the teeth should start protection.


       How can we help children grow through food a white teeth do? Ie what foods will help children grow teeth? There are three aspects are noteworthy:


       ● To feed their children often crude fiber foods. Children eat these foods, you must go through in order to continue to chew the food swallowed into the stomach. Repeated chewing may

So that the jaw movement and muscle constantly, thus promoting the development of the jaw, dental machine increasing its width, but also makes the blood circulation of the collar. There is enough space to grow, raw

Long out of teeth will be more rigid solid. Moreover, full activity can chew facial muscles, preventing deformity arrangement of teeth have a significant role.


       ● To add enough calcium, eat less sugar, let the children daily intake of adequate nutrition.


       ● should eat more vegetables, the increasing standard of living today, parents should give their children to eat more vegetables with fiber, leeks, celery, beans, etc. can be

To. In permanent teeth before particular attention to this aspect of food allocation.


       So, just do the above points, dental instruments the child can be more healthy tooth growth.

brush your teeth more attention

 Brushing is everyone's daily life have to do one thing, dental experts say: everyone will brush your teeth, but not everyone will brush your teeth, brushing a small matter, but there are

A very high knowledge, learn proper brushing right to maintain personal oral hygiene is extremely important, let us listen to dental professionals about brushing detail.

     Dental: Toothbrush choice
    Only selected in line with the requirements of oral health care toothbrush, can play the effect of cleaning teeth, and does not damage the teeth and periodontal tissues. dental Vacuum Former Toothbrush its features are:


    A bristle arrangement is reasonable, usually 2 to 3 rows, easy to clean after brushing teeth and toothbrush itself clean. Bristles made of high quality nylon yarn, thin and flexible.
    B brush head is small, flexible rotation in the mouth.
    C rounded tip bristles, easy to damage when brushing the teeth and gums.


    Dental: Toothbrush maintenance and replacement
    After each brushing toothbrush must be cleaned with water and drying, the brush up dry and ventilated place. It should be noted, toothbrushes use a long time, the bristles will

Bending disheveled or even fall off, weakening the tooth cleaning capacity, therefore, must be replaced every three months a toothbrush, avoid several people sharing a toothbrush.


    Dental: Toothpaste selection
    Select your preferred toothpaste fluoride toothpaste, combined with other toothpaste. dental unit price Fluoride toothpaste is not only the role of inhibiting dental plaque, and can protect the enamel, strengthen teeth against

Acid ability to prevent dental caries.


    Dental: brushing water
    Brushing the water temperature by the relevant study confirmed that the teeth suitable for water temperatures of 30 to 36 degrees for normal metabolism. So when brushing the teeth as long or be quenched

First heat stimulation, not only prone to bleeding gums, but also directly affect the normal metabolism of the teeth, easy to induce dental problems, affecting the life of the teeth, affecting their health.

   Dentistry: How to brush your teeth properly
   Brush maxillary posterior teeth, the toothbrush is placed on the maxillary posterior teeth, the bristles and teeth was 45 degrees, and then turn the brush from top to bottom brush, brush each part repeated about 10 times

, The same as in the outside brush method. Brush mandibular teeth, the toothbrush is placed on the mandibular posterior teeth, brush and teeth continued to show a 45 degree angle, rotating brush, brush from the bottom up, various parts of the re-

Complex about 10 times in the same outer brush method. On the labial surface of the mandibular anterior teeth after brushing method and the same way. Brush palate anterior teeth tongue surface and the lower front teeth, you can play head will be established,

From top to bottom on the tooth brush, brush the lower teeth from the bottom up. Occlusal surface of the upper and lower teeth when brushing, teeth bite into the surface of the toothbrush, a little harder to brush back and forth horizontally.


    Dental: brushing time
    Brushing should be done daily at the time and in the evening before going to sleep early brush your teeth once and stick mouthwash after meals. Brushing time 3 to 5 minutes to all parts of the tooth

Brush. Brush your teeth before going to bed at night is more important, because it accumulates in the clear day meals food residue on the teeth stains.

teeth invisible braces

Teeth invisible braces advantages:
1, convenient: You can pick their own wear, does not affect the social, eating, exercise and so on. While reducing the number of referral, saving you valuable time.
2 Clean: oral hygiene easier to maintain, do not worry gingivitis, tooth demineralization, discoloration and other issues.
3, convenient: Short and effective course of treatment, the general treatment can be completed around September to dental drill December. Traditional methods of treatment time of about 8 hours, invisible orthodontics only 3 hours.
4, appearance: almost completely invisible. You will notice it in someone else to complete orthodontics, solves many patients straightening teeth appearance concerns.
5 Comfort: Since there is no traditional sense of the bracket, steel and other orthodontic appliance correction process is no longer suffering. On periodontal tissue irritation and discomfort minimum.

dental machine status abroad

We developed countries tableting machine with compression technology gap is widening, high yield, airtight, modular, automated, large-scale and advanced

Detection technology is the most important foreign tableting machine technology development direction. Advanced tableting machine base in Europe, such as Germany FETTE, KORSCH, UK MANESTY, Billy

When COURTOY, USA STOKES so on. High degree of automation of its products, in compliance with FDA requirements and 21CFRPART11 requirements.

(1) high speed, dental tools high yield. High speed and high output was tableting machine manufacturers over the years has always been the goal, the main tableting machine manufacturers already have hourly output

Reach 1 million tableting machine. If Manestry produced Xpress700 type tableting machine yield amounted to 1,000,000; Korsch XL800 type produced by tableting machine

Maximum output reached 1.02 million / h; Courtoy produced ModulD type tableting machine maximum output reached 1.07 million / h; Fette 4090i produced the highest type tableting machine

Production reached 1.5 million / h. Its production is much higher than domestic production of tablet presses, tablet confidential domestic production to catch up in terms of speed than abroad, you need to create a tabletting machine design

New processing technology, automatic control and other aspects have made great progress. Tabletting machine

(2) tabletting process link airtight and flow, logistics isolation. Foreign tableting machine input and output is very good sealing, to minimize cross-contamination

. Granules for tableting barrel and closed via a closed conveyor system into the hopper, tabletting process to take effective measures to prevent dust emissions and particulate stratification, pressure is good

Tablets through sieve, the film detection, metal detection, etc. into the packaging process, the whole process was very confined. While most domestic pressure tableting machine process is open,

Or is not completely closed, fracture resulting tableting process between dust. With the further implementation of GMP in the tabletting process link airtight and flow, logistics

Isolation becomes particularly important, this is our design and manufacture equipment must have the basic functions.

(3) CIP. CIP (cleaning in place) tableting machine, enabling users to significantly reduce the cost of equipment. Improve the tableting machine cleaning function, in addition to the design

Fully consider the various parts of the cleaning, the tableting machine disassembly cleaning function is to emphasize that only convenient and quick removal, in order to ensure the thoroughness of cleaning.

(4) 21CFRPart11 (electronic records and electronic signatures) in tableting machine application. August 20, 1997, FDA issued 21CFR11 Part 6 "e-

Records, dental Suction Unit electronic signatures (ER / ES) with the relevant regulations came into force. Of electronic signatures and electronic records, the present regulations are enforced, the purpose of this Ordinance

Of that for pharmaceutical products and food processing to facilitate the introduction of electronic technology. It can provide a suitable and practical guidelines, as set forth

What to do in the past through the electronic form in writing task. Refers to the electronic record as text, graphics, data, audio, icon, or other by scoring

Computer systems to create, modify, maintain, archive, collect or distribute information in digital form between the expression of any combination. Electronic signature refers performed by individuals

, Adopted or authorized, and after a computer data compilation of any symbol or series, which conform with personal handwritten signature has the same legal effect.

21CFRPart11 technology in the tablet press on the application, making the tableting machine with device diagnostics logging, logging accidents and alert notification log. These electronic records

And electronic signatures are detailed records on a variety of operational data, accident data. Compliance with safety access control, requires a user name and password to enter the operation. All numbers

According to the use of the electronic signature function, including the operator name, date, time, serial number, problems, solutions, condition data. All raw data are not

Can be artificially modified to ensure the reliability and authenticity. The presence of these systems and users will automatically log into the whole "traces review" folder. This

Some security attribute data format "to ensure data changes are under the control of the overall examination into the tablet press line. Domestic in this area is just beginning.

(5) connected with the entire production line control technology. Put a tableting machine can be connected to a production line in Germany and the UK tableting machine have this feature

. It has a beginning, end, and speed adjustment function. Use this option to function reliably, automatic production line with other devices, such as sieve, suction

Dust, testing, transportation, bottled, etc. are connected together, synchronization is complete pills suppress production tasks. Meanwhile, the external device also uses a different means of monitoring,

Provides high security and reliability of energy. Using the line detector can suppress tablets clear burrs, remove dust; vacuum monitoring function is the use of traffic

Monitor regularly the specified location on the suction tube suction pressure testing. Continuously set and actual values ​​of the comparison, if the detector 10s in the suction tube

The suction pressure is not detected (no flow), the pressure plate machine that is a fault alarm and stop operation. This feature is to maximize the protection of the production can be

Reliability, the tablet can be continuously remove the dust suppression of the production process. And the entire production line to connect the tablet is a tablet control technology production control of new technologies, is the future

Trends. This technology in China has just started.

(6) tableting machine remote monitoring and remote diagnostic system. With networking, broadband network, virtual, etc. The rapid development of high-tech computer equipment remote monitoring and

Remote diagnostics technology is also increasingly emerging. Computer-controlled pharmaceutical tableting machine began extensive application of remote monitoring and remote diagnostics technology in the industry has a tableting machine

Useless. , Advanced in developed countries has generally been on the tableting machine with remote monitoring and remote diagnostics. In order to establish such a system is also implemented technical support

Center (service side) and tableting machine side (user) dialogue through the Internet network, enabling service side can understand the user via the Internet in different places tableting machine out

The fault lies now, and tabletting machine working status of the instruction is executed, and then on the tableting machine fault judgment and propose possible solutions. By a tabletting machine

Remote monitoring and remote diagnostics system establishment, real-time troubleshooting, greatly improving the tableting machine manufacturer's service response capacity and speed, but also

Improve the economic efficiency of enterprises. Tabletting machine remote monitoring and remote diagnostics system should include staffing, network construction, hardware and software selection, etc.,

Respectively, to complete failure of the monitoring, analysis, feedback, and real-time resolution services issued these processes in order to ensure the effective operation of the entire system.

the control points

⑴ control orifice positioning error
In the above settings Secant Pile Top Construction guide wall (This project uses reinforced concrete guide wall, can also be recycled steel guide wall), the guide wall set positioning hole, the diameter should be bigger than the pile diameter 20 ~ 40mm. Rig in place, check the first one cannula inserted into the positioning hole and require the construction unit is adjusted so that the positioning around the casing to maintain a uniform gap between the holes.
⑵ urge the construction unit controls the vertical piles
According to design requirements, dental instruments pile vertical deviation of not more than 3 ‰. Secant pile in order to ensure a sufficient thickness at the bottom of the amount of bite, in addition to its strict control orifice positioning errors, but also its vertical strictly controlled.
Pore-forming process to control the verticality of the pile, you must grasp the following three aspects of the work:
① straight cannula degree examination and correction
Secant piles on flat ground before casing straight degree examination and correction, first check and correct single casing straight degrees, and then will follow the entire length of the pile sleeve configured to connect together for the entire root sheath tube (15 ~ 25m) of straight deviation should be less than 10mm. Detection method: measured on the ground emit two mutually parallel lines, the sleeve is placed between the two lines, and a line for testing the hammer and ruler.
② pile into the hole during the vertical monitoring and inspection
a ground monitoring: ground select two mutually perpendicular directions using the line hammer monitoring above-ground parts of the vertical casing, correct any deviations found. This test in each pile into the hole process should adhere to from beginning to end, can not be interrupted.
b check: After installing each section of casing pressure casing before the next section, we must stop to use the "test loop" in the hole verticality checks, failed when the need for correction, until qualified to the next section casing construction.
③ correction
Pore-forming process, such as found in vertical deviation is too large, the importance of timely corrective adjustments require the construction unit, correcting There are three common methods:
a cylinder with a rig for correction: If the deviation is not greater than or buried casing is not deep (5m less), you can directly use the rig two jacking cylinders and two sliding vertical cylinder adjustment sleeve, you can achieve the purpose of correcting .
b pile Correction: If A pile buried 5m large offset occurs below, you can first use drill cylinder direct correction, such as below standard, can be filled with sand to the casing or clay, while filling side uprooted casing, until enhance the sleeve to the last pass the inspection place, and then straighten casing, check and re-qualified under vertical pressure.
c correction: B Pile A pile corrective method is basically the same, the difference is that the casing can not be filled while filling the same with the A pile of concrete, or they may be left in the soil between piles mezzanine, thus affecting the row Pile waterproof effect.
⑶ ultra-retarding Concrete Construction Quality Control
A pile of concrete retarding time should be based on time to determine the pile into the pile, pile into the pile time and geological conditions of the construction site, pile length, pile diameter and drilling capacity factors. According to bite Piles, A pile initial setting time of T = 3t + K + Q;
Where: T - A pile of dental hand piece concrete retarding time t - the time required for single pile into the pile
K - reserve time, usually 1.0t Q - Night downtime
A pile general preliminary control initial setting time of 60h, the construction in the future be adjusted according to the scene.
⑷ occlusal thickness determination
Engagement between adjacent pile thickness d to select based on length of pile, pile shorter occlusal thickness is smaller, thicker pile longer bite, are calculated as follows:
2 (kl + q) ≤ d - 50mm (which is to ensure a minimum pile occlusal thickness not less than 50mm)
Where: l - pile length d - Secant Pile design occlusal thickness
k - pile verticality q - orifice positioning error tolerance

Three Mistakes of cleaning teeth

Myth one: daily brushing, teeth cleaning can be described as superfluous
In developed countries, has become very popular teeth cleaning routine dental care, people generally once or twice a year to find their dentist regularly to clean teeth. Therefore, we are now the most important is a correct understanding of cleaning teeth, changing concepts. Cleaning teeth cleaning teeth completely different from ordinary light surface dirt, it can not be completely removed by ordinary brushing to remove plaque, calculus, and deposited on the tooth surface of the pigment, thereby enabling organizations to maintain periodontal health, prevention and treatment of periodontal disease; and easy to find when cleaning teeth tiny imperceptible dental problems, such as the relatively hidden caries, to achieve the purpose of early detection and early treatment. Under normal circumstances, teeth cleaning as a routine care in six months or a year wash, for patients with Light Cure periodontitis, you need the guidance of a doctor for regular teeth cleaning.
Myth: cleaning teeth can damage teeth, worn tooth enamel surface
A lot of people kind of concerns, cleaning teeth will wear away the enamel surface of the tooth. In actual fact, ultrasonic scaler, it is the principle of ultrasonic vibration, not worn out, no harm to the teeth, the needle does not have any cutting function, is to rely on high-frequency ultrasonic vibrations to break calculus, but also in cleaning teeth after By polishing, sandblasting in the teeth externally applied layer of protective film, slowing the speed of the stone again.
Myth: beauty salon and a few small clinics have clean teeth, there faster than a regular hospital, more convenient
Now if there is a dental clinic, hospital, generally have clean teeth this service, even the little salons also have such service, and very cheap. But the doctors spoke of the need to promote clean teeth, but also to secure formal. In some small clinics or beauty salon, and its rapid irregular teeth cleaning teeth cleaning methods will give those who have adverse consequences for cleaning teeth's enamel damage itself, forming the naked eye can not see the surface scratches, dental supply companies but also damage to the gums, increased periodontal disease, the most serious yet easily cause cross-infection, without safe disinfection of instruments is very easily transmitted viruses such as hepatitis and AIDS, to give people cause trouble. In the regular hospital by medical personnel are dedicated to the operation, the most commonly used is the ultrasonic scaler, the instrument, the needle should be strictly disinfected.

cleaning teeth

Cleaning teeth is a good means of dental care is also the primary treatment of periodontal disease measures, through regular cleaning teeth, not only can thoroughly remove plaque and calculus on the teeth, so to maintain a healthy periodontal tissues, prevention of periodontal disease, moreover, easy to find when cleaning teeth tiny imperceptible dental problems, such as the relatively hidden caries, so as to achieve the purpose of early detection and early treatment.
Cleaning teeth, commonly known as scaling, jargon supragingival scaling technique (supragingival scaling), refers to the equipment used to remove supragingival scaling tartar, plaque and color stains and polish the tooth surface, to delay the re-deposition of plaque and calculus . Plaque and tartar are the most important local incentives periodontal disease, surgery is the removal of subgingival scaling plaque and tartar on the most effective method.
Teeth cleaning - Methods
Hospital cleaning teeth

Hospital cleaning acrylic resin teeth  can be divided into ultrasonic scaler, sandblasted clean teeth, clean teeth and hand-three. Now we often say that the teeth cleaning generally refers to the ultrasonic scaler and sandblasting cleaning teeth, teeth cleaning method for these two indications are not the same.
Living Scaler

Called life cleaning teeth, in the daily life of the most commonly used method of cleaning teeth. The most commonly used to maintain oral health and necessary way to clean teeth brushing, in addition, mouthwash, toothpicks, etc. are also common teeth cleaning methods.

missing teeth bite

Generally missing teeth bite mainly refers to the remaining maxillary dental midline midline is not aligned with the teeth, jaw teeth down side to the inside, which not only affects the appearance of the teeth, but also for the normal functioning of oral and periodontal health and Oral health has a great impact. By U.S. dental correction to achieve good results. Reason

(1) early loss of teeth: there will be lack of space, resulting in crowded dislocation.
(2) bad habits: habitual thumb sucking, licking tongue. Jiao lips, bite things, stretching the lower jaw and the bad habit of swallowing, unilateral chewing habits, etc., can cause a variety of malocclusion.
(3) more teeth: teeth can cause multiple teeth, jaw morphology system dysfunction.
(4) Congenital dental Suction Unit missing teeth: more development and embryo reasons, mostly for lack of third molars phylogenetic degradation.
(5) deciduous teeth: Individual Dental shedding of deciduous teeth are not overdue, for following the eruption of permanent teeth can lead to the obstruction was an ambush, or misplaced eruption.
(6) Rujian tooth wear inadequate: because children eat too soft, so some nipples more teeth than other tooth wear, and thus higher arch occlusal surface, resulting in premature contact, causing the front or side movement, the formation of crossbite.
Missing teeth bite correction method can be used to solve, but very safe, according to each person's situation to determine the correction techniques and methods, it is best to a regular hospital for consultation.